Tidy up spec helpers

spec/rails_helper.rb

@@ -1,33 +1,17 @@
-# This file is copied to spec/ when you run 'rails generate rspec:install'
 require "spec_helper"
 ENV["RAILS_ENV"] ||= "test"
 require File.expand_path("../config/environment", __dir__)
-# Prevent database truncation if the environment is production
+
 if Rails.env.production?
   abort("The Rails environment is running in production mode!")
 end
+
 require "rspec/rails"
-# Add additional requires below this line. Rails is not loaded until this point!
 require "shoulda/matchers"
 require "capybara/rspec"
 
-# Requires supporting ruby files with custom matchers and macros, etc, in
-# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
-# run as spec files by default. This means that files in spec/support that end
-# in _spec.rb will both be required and run as specs, causing the specs to be
-# run twice. It is recommended that you do not name files matching this glob to
-# end with _spec.rb. You can configure this pattern with the --pattern
-# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
-#
-# The following line is provided for convenience purposes. It has the downside
-# of increasing the boot-up time by auto-requiring all files in the support
-# directory. Alternatively, in the individual `*_spec.rb` files, manually
-# require only the support files necessary.
-#
-Dir[Rails.root.join('spec', 'support', '**', '*.rb')].each { |f| require f }
+Dir[Rails.root.join("spec", "support", "**", "*.rb")].each { |f| require f }
 
-# Checks for pending migrations and applies them before tests are run.
-# If you are not using ActiveRecord, you can remove these lines.
 begin
   ActiveRecord::Migration.maintain_test_schema!
 rescue ActiveRecord::PendingMigrationError => e
@@ -36,33 +20,13 @@ rescue ActiveRecord::PendingMigrationError => e
 end
 
 RSpec.configure do |config|
-  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
   config.fixture_path = "#{::Rails.root}/spec/fixtures"
 
-  # If you're not using ActiveRecord, or you'd prefer not to run each of your
-  # examples within a transaction, remove the following line or assign false
-  # instead of true.
   config.use_transactional_fixtures = true
 
-  # RSpec Rails can automatically mix in different behaviours to your tests
-  # based on their file location, for example enabling you to call `get` and
-  # `post` in specs under `spec/controllers`.
-  #
-  # You can disable this behaviour by removing the line below, and instead
-  # explicitly tag your specs with their type, e.g.:
-  #
-  #     RSpec.describe UsersController, :type => :controller do
-  #       # ...
-  #     end
-  #
-  # The different available types are documented in the features, such as in
-  # https://relishapp.com/rspec/rspec-rails/docs
   config.infer_spec_type_from_file_location!
 
-  # Filter lines from Rails gems in backtraces.
   config.filter_rails_from_backtrace!
-  # arbitrary gems may also be filtered via:
-  # config.filter_gems_from_backtrace("gem name")
 
   config.include AuthHelpers, type: :feature
   config.include ClarifaiHelpers
@@ -76,12 +40,10 @@ Shoulda::Matchers.configure do |config|
 end
 
 OmniAuth.config.test_mode = true
-omniauth_hash = {
+
+OmniAuth.config.add_mock(
+  :github,
   provider: "github",
   uid: "1",
-  credentials: {
-    token: "12345"
-  }
-}
-
-OmniAuth.config.add_mock(:github, omniauth_hash)
+  credentials: { token: "12345" },
+)

spec/spec_helper.rb

@@ -1,97 +1,18 @@
 require "webmock/rspec"
 WebMock.disable_net_connect!
 
-# This file was generated by the `rails generate rspec:install` command.
-# Conventionally, all specs live under a `spec` directory, which RSpec adds to
-# the `$LOAD_PATH`. The generated `.rspec` file contains `--require spec_helper`
-# which will cause this file to always be loaded, without a need to explicitly
-# require it in any files.
-#
-# Given that it is always loaded, you are encouraged to keep this file as
-# light-weight as possible. Requiring heavyweight dependencies from this file
-# will add to the boot time of your test suite on EVERY test run, even for an
-# individual file that may not need all of that loaded. Instead, consider making
-# a separate helper file that requires the additional dependencies and performs
-# the additional setup, and require it from the spec files that actually need
-# it.
-#
-# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
 RSpec.configure do |config|
-  # rspec-expectations config goes here. You can use an alternate
-  # assertion/expectation library such as wrong or the stdlib/minitest
-  # assertions if you prefer.
   config.expect_with :rspec do |expectations|
-    # This option will default to `true` in RSpec 4. It makes the `description`
-    # and `failure_message` of custom matchers include text for helper methods
-    # defined using `chain`, e.g.:
-    #     be_bigger_than(2).and_smaller_than(4).description
-    #     # => "be bigger than 2 and smaller than 4"
-    # ...rather than:
-    #     # => "be bigger than 2"
     expectations.include_chain_clauses_in_custom_matcher_descriptions = true
   end
 
-  # rspec-mocks config goes here. You can use an alternate test double
-  # library (such as bogus or mocha) by changing the `mock_with` option here.
   config.mock_with :rspec do |mocks|
-    # Prevents you from mocking or stubbing a method that does not exist on
-    # a real object. This is generally recommended, and will default to
-    # `true` in RSpec 4.
     mocks.verify_partial_doubles = true
   end
 
-  # This option will default to `:apply_to_host_groups` in RSpec 4 (and will
-  # have no way to turn it off -- the option exists only for backwards
-  # compatibility in RSpec 3). It causes shared context metadata to be
-  # inherited by the metadata hash of host groups and examples, rather than
-  # triggering implicit auto-inclusion in groups with matching metadata.
   config.shared_context_metadata_behavior = :apply_to_host_groups
 
-  # The settings below are suggested to provide a good initial experience
-  # with RSpec, but feel free to customize to your heart's content.
-  #   # This allows you to limit a spec run to individual examples or groups
-  #   # you care about by tagging them with `:focus` metadata. When nothing
-  #   # is tagged with `:focus`, all examples get run. RSpec also provides
-  #   # aliases for `it`, `describe`, and `context` that include `:focus`
-  #   # metadata: `fit`, `fdescribe` and `fcontext`, respectively.
-  #   config.filter_run_when_matching :focus
-  #
-  #   # Allows RSpec to persist some state between runs in order to support
-  #   # the `--only-failures` and `--next-failure` CLI options. We recommend
-  #   # you configure your source control system to ignore this file.
-  #   config.example_status_persistence_file_path = "spec/examples.txt"
-  #
-  #   # Limits the available syntax to the non-monkey patched syntax that is
-  #   # recommended. For more details, see:
-  #   #   - http://rspec.info/blog/2012/06/rspecs-new-expectation-syntax/
-  #   #   - http://www.teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
-  #   #   - http://rspec.info/blog/2014/05/notable-changes-in-rspec-3/#zero-monkey-patching-mode
-  #   config.disable_monkey_patching!
-  #
-  #   # Many RSpec users commonly either run the entire suite or an individual
-  #   # file, and it's useful to allow more verbose output when running an
-  #   # individual spec file.
-  #   if config.files_to_run.one?
-  #     # Use the documentation formatter for detailed output,
-  #     # unless a formatter has already been configured
-  #     # (e.g. via a command-line flag).
-  #     config.default_formatter = "doc"
-  #   end
-  #
-  #   # Print the 10 slowest examples and example groups at the
-  #   # end of the spec run, to help surface which specs are running
-  #   # particularly slow.
-  #   config.profile_examples = 10
-  #
-  #   # Run specs in random order to surface order dependencies. If you find an
-  #   # order dependency and want to debug it, you can fix the order by providing
-  #   # the seed, which is printed after each run.
-  #   #     --seed 1234
-  #   config.order = :random
-  #
-  #   # Seed global randomization in this process using the `--seed` CLI option.
-  #   # Setting this allows you to use `--seed` to deterministically reproduce
-  #   # test failures related to randomization by passing the same `--seed` value
-  #   # as the one that triggered the failure.
-  #   Kernel.srand config.seed
+  if config.files_to_run.one?
+    config.default_formatter = "doc"
+  end
 end